The Windows Sensor is designed to run on Windows 10 (64-bit, all editions) or Windows Server 2016+ as a system service. For system requirements, see the Windows Sensor Requirements article in this section of the knowledge base.
EASE OF DEPLOYMENT - Extremely Easy (<5 minutes)
Steps to complete the installation:
1. Download the Nodeware installer from the Nodeware Portal.
• Login at https://app.nodeware.com
• Select Sensors. (left menu)
• Select Downloads. (top right) See screenshot below.
2. Once downloaded, launch the installer by double clicking it.
3. You'll be presented with the following screens:
Follow the on-screen instructions to complete the installation. Record the code displayed on the screen.
Continue with the activation process below.
Activate Your Sensor:
1. Return to the Nodeware Dashboard located again at https://app.nodeware.com
2. Click Sensors. (left menu)
3. Click Connect a Sensor. (top right-hand corner)
The screen below appears.
4. Enter the 4-digit code provided by the Nodeware installation process above.
5. You may also provide an optional Sensor Label. (e.g., the label could be a location.)
6. Select the customer the Sensor is applied to. Click for a drop-down menu listing the customers.
7. Select Connect when complete.
****IMPORTANT****
At this time, you should return to your local Windows installation and complete the install process.
Your sensor installation and activation are now complete. After 30 minutes, the Nodeware dashboard will begin propagating the network information.
Comments
0 comments
Please sign in to leave a comment.